• Subscribe
  • My Cart
Aus 1300 327 672 | Int'l +61 7 4602 4150
[email protected]

Airseeder Head Blockage Monitor Kit – Twin Shoot with 12 Sensors

Airseeder Head Blockage Monitor Kit – Twin Shoot with 12 Sensors

$4,050.00 AUD (Ex GST)

Airseeder Head Blockage Monitor Kit – Twin Shoot with 12 Sensors

SKU: 1020T Category:

Description

THIS KIT IS TWIN SHOOT WITH 2 MONITORS & 12 HEAD SENSORS

Includes 2 x 1020 Monitor and 12 x 1021 Head Sensors to allow individually monitoring of seed and fertiliser distribution on one machine.
Order additional 1021 Sensors as required. (Max 24)

NO MORE COSTLY UNSOWN STRIPS, GREAT FOR SEED & SUPER !

Day or night there’s no need to continually check your machine. The 1020 monitor warns you before major blockages end up costing you time and money!

The result is much less downtime, faster seeding and complete peace of mind.

The sensors are a proven performer with thousands of systems in operation. It can pay for itself fast!

HOW IT WORKS

Fully sealed impact sensors equipped with a bright red LED are bolted to each primary  and secondary distribution heads.

Sensors are then interconnected on a simple party line cable that runs across the implement, avoiding the need for messy separate wires to each sensor.

As material flows, the sensor listens to the sound level according to sowing rates of both seed and fertiliser, all the operator adjusts is the sensitivity control on each until the cab warning light remains just off – simple as that!

A drop in flowrate or blockage at any primary or secondary head will activate the red LED at the sensor causing the cab alarm and warning light to activate.

By switching to Hold, the operator can freeze the system and a quick inspection of all sensors will immediately pinpoint the problem.

The 1020 assists in picking many other problems with airseeders such as fan too slow or not engaged, disconnected and blocked primary hoses, lids not properly shut, empty bins, broken drives etc.

LOOKING FOR A SINGLE SHOOT SYSTEM TO MONITOR BOTH SEED & FERTILISER?
SEE OUR 1020 KIT

INSTALLATION

Anyone can install the system in half a day with a drill, pliers and screwdriver.

The installation kit is complete including full instructions, cable, implement connectors and zip ties.

The Standard 1021 Secondary Head Sensors supplied in the kit will fit virtually any airseeder.

Help for this product can be found under the SUPPORT section of our website.

Do you need this product repaired? Please refer to Our Service Agents page.

Your Name (required)

Your Email (required)

Your State

Your Contact Ph (required)

Your Message

Cart Item Removed. Undo
  • No products in the cart.