• Subscribe
  • My Cart
Aus 1300 327 672 | Int'l +61 7 4602 4150
[email protected]

Baler Moisture Tester Plus – (Dual Sensor)


Baler Moisture Tester Plus – (Dual Sensor)

$840.00 $720.00 AUD (Ex GST)

SKU: 2178 Category:


The new 2178 has advanced multi-sensor technology for greater overall accuracy while baling hay with square or round balers. The 2178 mounts in the cab of the tractor and provides a direct readout for % moisture while baling hay. Having multiple moisture content readings during each step of the haymaking process is critical to finishing with a high quality product.

Due to the many variables associated with hay moisture measurements an occasional “spot check” using a handheld probe on finished bales is recommended. (Farmscan AG 2188 Digital Hay Probe)


  • Bale type: small square and round
  • Multi-sensor technology takes readings from the left, right and middle of the bale for greater overall accuracy
  • Average of readings updated and displayed every 3 seconds
  • Large, illuminated LCD display and keypad for easy viewing during day or night
  • ± Moisture offset adjustments
  • Adjustable high/ low limit of moisture reading
  • Firmware/calibration curves upgradable via standard USB


  • Moisture range: 8% to 40% depending on baler type use
  • Accurate throughout the normal range of stored hay
  • Display resolution: 0.1% moisture


  • Display module
  • 3m power cable
  • Two sensor pads
  • Two 10m sensor cables
  • Twelve sensor cable ties
  • Mounting Hardware
  • USB Cable
  • Installation instructions

Help for this product can be found under the SUPPORT section of our website.

Do you need this product repaired? Please refer to Our Service Agents page.


Round Baler

Small Square Baler

  • This sensor pad can be mounted on a flat spot approx 300mm (12″) up the side wall of the bale chamber. Mount the second pad directly across from the first one but on the opposite wall.

Your Name (required)

Your Email (required)

Your State

Your Contact Ph (required)

Your Message